Mayflower Trading Company

A pilgrimage to resource efficiency

Storable Food

Long Term Food Storage

Organic Food Storage

Food Storage Variety Packages

Freeze-Dried Food in #10 Cans

Dehydrated Food in #10 Cans

Storable Food in Buckets

One Year Supply Storable Food Packages

Bulk Foods

Emergency Preparedness

Portable Power Systems

Emergency Survival Food

First Aid

Trauma Kits

Emergency Kits

Water Filtration and Storage

Camping Gear

Light, Heat and Cooking

Housewares

Home Canning Equipment & Supplies

Non-electric Kitchen Tools

Meat Grinders and Slicers

Popcorn Poppers

Countertop Appliances

Home > Alternative Energy > Inverters > Xantrex XW Series Inverter/Chargers

Xantrex XW Series Inverter/Chargers

Xantrex XW Sine Wave Battery-Based Series Inverter/Charger System

The Schneider Electric Xantrex XW Series hybrid inverter/charger has an innovative, integrated design that minimizes external balance-of-system components allowing for quick and easy installation as either a grid-tie battery-backup system or a fully off-grid power system. The XW offers split-phase 120/240VAC output from a single inverter. Up to 4 inverters can be paralleled for up to 24kW of total output in a 120/240V splitphase system, or operate in a 208VAC 3-phase configuration with up to 2 inverters per phase (6 inverters total) for up to 36kW of power. Models are also available for 230V or 400VAC three-phase at 50Hz for overseas operation. Charge controllers are required for use with any PV array.
High surge capacity is achieved by using digital control to regulate the output voltage from dropping during surge. Efficient, power-factor-corrected, high-current multi-stage battery charging minimizes recharge time and electricity/fuel costs. Dual AC inputs (grid and generator). Full control of generator with optional automatic generator start (AGS) unit. Configurable auxiliary relay output of 250mA at 12VDC included in each inverter.
The inverter display panel shows status at a glance. LEDs indicate AC-in status, faults/warnings, equalize mode, and battery state of charge. Three-character LED indicates output power or charge current. A battery temperature sensor is included with each inverter, but only one is needed per system
.

Model	Continuous watts	Battery voltage	AC out volts/ hertz	No load draw	Charger amps	Peak AC surge	Inverter Weight (lbs)
XW4024-120/240-60	4000	24VDC	120/240V/60Hz	24W	150	8000W	116
XW4548-120/240-60	4500	48VDC	120/240V/60Hz	26W	85	9000W	118
XW6048-120/240-60	6000	48 VDC	120/240V/60Hz	28W	100	12000W	122

Products (Total Items: 3)

Xantrex XW Sine Wave Inverter/Charger XW6048-120/240-60

Your Price: $4,650.00

Xantrex XW Sine Wave Inverter/Charger XW4548-120/240-60

Your Price: $3,520.00

Xantrex XW Sine Wave Inverter/Charger XW4024-120/240-60

Your Price: $3,520.00

Additional components for your Inverter/Charger System

XW Power Distribution Panel w/ conduit box for 1 XW Inverter

Power Distribution Panel includes a conduit box and all AC/DC disconnects and wiring to support one inverter. The distribution panel has wiring space and enough knockouts to add up to three inverters and/or four charge controllers. Each charge controller requires an input breaker and output breaker. Field-reversible door with magnetic catch makes access to wiring easy.
030-01169

XW Connection Kit is needed for each additional inverter, includes breakers and conduit box

The XW Connection Kit contains everything needed to add a second inverter. For a third inverter, use one Connection Kit plus a pair of 5-foot 4/0 inverter cables, with lugs on each end. An external transfer switch will be required if the
inverter bypass function is desired. For four inverters, use two Power Distribution Panels and two Connection Kits.
030-01172

XW empty conduit box raceway

Use the XW conduit box to retrofit XW inverters into existing systems which already have AC/DC disconnects.
030-01175

XW 60A MPPT charge controller with built-in ground fault protection - 150VDC max input voltage

The XW-MPPT60-150 can be used with PV arrays with voltages ranging from battery voltage to 150 VDC and can support an output of up to 60 amps into the battery for battery voltages of 12 to 60 VDC. The PV open circuit voltage must not exceed 150 VDC.
020-08040

Input circuit breaker for MPPT60-150 charge controller; 60 A 160 VDC 030-01192

Output circuit breaker for MPPT60-150 charge controller; 80 A 125 VDC 030-01189

XW Auto Generator Start module for the XW system
030-01183

XW System Control Panel

The XW System Control Panel plugs into the Xanbus network and provides a central user interface to configure and monitor all
components in the system. One is required per XW system to change inverter programming.
030-01181