Home > Alternative Energy > Inverters > Xantrex XW Series Inverter/Chargers

Xantrex XW Sine Wave Inverter/Charger XW4024-120/240-60

Part Number 030-01166

Xantrex XW Sine Wave Inverter/Charger

Email a friend

Price

Your Price:

$3,520.00

Quantity

Add to Wish List

Description

Xantrex XW Sine Wave Battery-Based Inverter/Charger System XW4024-120/240-60

The Schneider Electric Xantrex XW Series hybrid inverter/charger has an innovative,integrated design that minimizes external balance-of-system components allowing for quick and easy installation as either a grid-tie battery-backup system or a fully off-grid power system. The XW offers split-phase 120/240VAC output from a single inverter. Up to 4 inverters can be paralleled for up to 24kW of total output in a 120/240V splitphase system, or operate in a 208VAC 3-phase configuration with up to 2 inverters per phase (6 inverters total) for up to 36kW of power. High surge capacity is achieved by using digital control to regulate the output voltage from dropping during surge. Efficient, power-factor-corrected, high-current multi-stage battery charging minimizes recharge time and electricity/fuel costs. Dual AC inputs (grid and generator). Full control of generator with optional automatic generator start (AGS)unit. Configurable auxiliary relay output of 250mA at 12VDC included in each inverter. The inverter display panel shows status at a glance. LEDs indicate AC-in status, faults/warnings, equalize mode, and battery state of charge. Three-character LED indicates output power or charge current. A battery temperature sensor is included with each inverter, but only one is needed per system.

You may also need:

Power Distribution Panel

The Power Distribution Panel includes a conduit box and all AC/DC disconnects and wiring to support one inverter. The distribution panel has wiring space and enough knockouts to add up to three inverters and/or four charge controllers. Each charge controller requires an input breaker and output breaker. Field-reversible door with magnetic catch makes access to wiring easy.

XW Connection Kit

The XW Connection Kit contains everything needed to add a second inverter. For a third inverter, use one Connection Kit plus a pair of 5-foot 4/0 inverter cables, with lugs on each end. An external transfer switch will be required if the inverter bypass function is desired. For four inverters, use two Power Distribution Panels and two Connection Kits.

XW Conduit Box

Use the XW conduit box to retrofit XW inverters into existing systems which already have AC/DC disconnects.

XW System Control Panel

The XW System Control Panel plugs into the Xanbus network and provides a central user interface to configure and monitor all components in the system. One is required per XW system to change inverter programming.

The inverter is field-serviceable without needing to remove it from the wall.

CSA Listed to UL 1741 for the U.S. and Canada.

Continuous watts	Battery voltage	AC out volts/ hertz	No load draw	Charger amps	Peak AC surge	Inverter Weight (lbs)
4000	24 VDC	120/240V/60Hz	24W	150	8000W	116

Dimensions of the inverter are 16 x 23 x 9 inches.

5-year warranty